Tracer®vma Electronic Flowmeter with AutoReg™ automatically adjusts the connected flow regulator opening, resulting in a more consistent flow rate and greater control over cooling water conditions without manual adjustments.
Automatic flow regulation compensates for changes in pressure that can occur during normal production due to in-line press startup or shutdown. The AutoReg responds quickly to maintain a steady cooling water flow rate essential for consistent molded part quality.
The flowmeter employs reliable vortex shedding sensor technology to monitor liquid flow rate and temperature. The control circuit provides programmable switch set points for high or low flow or temperature and turbulent flow rate (FCI Technology). Analog Outputs for flow and temperature are selectable for connection to data acquisition system or PLC. The totalizing function and BTU’s per minute calculation are also included with this model.
This flowmeter may be ordered with remotely mounted user interface. The user interface can be positioned up to 9.5 feet away from the flow body.
Sealed pushbuttons configure the flowmeter and switch operations through bright color LCD display and user-friendly menus. The SPDT switch can be wired directly to an alarm circuit in a process controller or other peripheral equipment such as low voltage stack lights.
NIST Traceable Calibration is available.
|Connection Size||Flow Range LPM||Flow Range GPM|
|3/8" & 1/2"||1 to 15||.3 to 4|
|3/8" & 1/2"||2 to 40||.5 to 10.6|
|3/4" & 1"||5 to 100||1.3 to 26.4|
|1"||10 to 200||2.6 to 52.8|