Mold Temperature Regulator
|
U.S. Patent No. 5,813,601
|
The Smartflow® Mold Temperature Regulator
effectively controls mold
cooling water temperature between 80°F and 120°F (27°C and 49°C) to
maintain a steady mold temperature. Installed to control water flow
exiting an injection mold, the Mold Temperature Regulator quietly
recovers waste heat from the resin shot, working without electricity
to reduce shop floor clutter and cut production costs. In many cases,
it is a simple, inexpensive substitute for a conventional electric
mold heater.
Click to download Mold Temperature Regulator catalog.pdf (335K)
Features and Benefits
- Replaces conventional mold heaters
- Low cost
- Holds temperature regardless of variables
- Unaffected by pressure changes
- Control different temperature zones with multiple units
- Unaffected by supply water temperature changes
- Low maintenance
- Uses no electricity
- No floor space required
- Three models available:
- 1/4" NPT inlet and 1/2" NPT outlet
- 1/4" quick-connect socket inlet and 1/4" quick-connect plug outlet
- 3/8" quick-connect socket inlet and 3/8" quick-connect plug outlet
|
