New 0-5 or 0-10V Analog Output for Temperature and Flow
TRACER® Switching Flowmeter
with programmable SPDT
Switch, Analog Output, and Flow Characteristic Indicator (FCI)
Measures liquid flow rate and temperature while providing one
programmable switching set point for high or low flow or temperature.
0 to 5 or 0 to 10 Volt Analog Output is now available for connection
to data acquisition system or PLC. BTU’s per minute calculation is
also available with this model.
8 to 28VDC power source operates the flowmeter to provide continuous monitoring of the process. Sealed pushbuttons configure the flowmeter and switching operations through user-friendly menus.
The SPDT switch can be wired directly to an alarm circuit in a process controller or other peripheral equipment. Four programmable set points can be individually turned off or set to actuate the switch.
Click to download Tracer flowmeter catalog
(138K)
Click to download Tracer Switching flowmeter instructions
(485K)
Features and Benefits
- Analog Output (0-5 or 0-10V selectable) for temperature and flow
- Programmable SPDT switch, 1A, 30VAC/42VDC
- Turbulent Flow Display (FCI)
- Remotely powered by 8-28 VDC
- Bi-directional flow reading
- Flow rate in gallons or liters per minute, +/- 5% Accuracy based on full range
- Temperature in Fahrenheit or Celsius
- BTU's per minute calculation
- Mount in any position
- 3/8", 3/4", 1", 1 1/2" and 2" NPT(F) connection sizes
- U.S. Patent Pending
|
FCI (Flow Characteristic Indicator) |
|---|
Turbulent Flow is the point at which cooling efficiency is optimized.
Flow rates higher than the point of Turbulent Flow do not improve
cooling. Using FCI, systemic cooling water flow can be optimized,
conserving water and maximizing cooling plantwide without plumbing
changes. "TFLOW" displays when Turbulent Flow is present within the
Tracer flowmeter.
Click For Additional Mold Cooling Information
|
Specifications
| Connection Size |
Flow Range GPM | Flow Range LPM |
|---|
| 3/8" |
0.5 to 8 | 2 to 30 |
| 3/4" | 2 to 20 |
8 to 76 |
| 1" | 3 to 30 |
11 to 114 |
| 1-1/2" | 6.5 to 60 |
25 to 228 |
| 2" | 10 to 110 |
38 to 418 |
Output:
Switch:
Power:
Environmental:
- Pressure: 150 psi max.
- Temperature: 32 to 180 degrees F (0 to 82 degrees C)
Wetted Parts:
- Flowmeter Body - Nickel Plated Brass or Anodized Aluminum, Stainless Steel is available. Contact your
distributor for details.
- Sight Window - Polysulfone (3/8" units only)
- Impeller - Nylon 6.12
- Shaft - 18-8 Stainless Steel
- Magnet - Neodymium
|
