2" Switching Tracer Flowmeter measures liquid flow rate and temperature while providing one programmable switching set point for high or low flow or temperature. Analog Outputs for flow and temperature are selectable: 0 to 5 or 0 to 10 Volts, for connection to data acquisition system or PLC.
BTU’s per minute calculation is also included with this model. User-supplied 8 to 28VDC power source operates the flowmeter to provide continuous monitoring of the process. Sealed pushbuttons configure the flowmeter and switching operations through user-friendly menus. The SPDT switch can be wired directly to an alarm circuit in a process controller or other peripheral equipment. Four programmable set points can be individually turned off or set to actuate the switch.
NIST Traceable Calibration is available.
FCI Technology
Turbulent Flow is the point at which cooling efficiency is optimized. Flow rates higher than the point of Turbulent Flow provide diminishing improvement to cooling rate. Using FCI Technology, systemic cooling water flow can be optimized, conserving water and maximizing cooling plantwide without plumbing changes. "TFLOW" displays when Turbulent Flow is present within the Tracer flowmeter.
Specifications
Connection Size | Flow Range GPM | Flow Range LPM |
---|---|---|
2" | 10 to 110 | 38 to 418 |
Wetted Parts:
Power:
Output:
Switch:
Environmental: